Wiley Fire Dept and OSE II

: Wylie Texas Fire Department set up to test the nonflammable point of OSE II when applied to gasoline and diesel at various depths

: Wylie Texas Fire Department set up to test the nonflammable point of OSE II when applied to gasoline and diesel at various depths

: CEO of OSEI Corporation observed the tests

: Wylie Fire Department mixed OSE II and water for tests

: Wylie Fire Department Chief and the CEO of the OSEI corporation observed tests

: OSE II\’s nonflammable point was determined by utilizing gasoline and Diesel fuels

: A Wylie fireman poured the fuel into a measuring cup

: A Wylie fireman poured the fuel into a measuring cup

: A Wylie fireman poured gasoline into the test pan

: A Wylie fireman poured gasoline into the test pan

: The gasoline was put in a test pan

: A Wylie fireman poured the OSE II and water mixture into the test pan with gasoline

: A Wylie fireman poured the OSE II and water mixture into the test pan with gasoline

: A Wylie fireman poured the OSE II and water mixture into the test pan with gasoline

: The gasoline started to emulsify minutes after the OSE II was applied

: The gasoline started to emulsify after the OSE II was applied

: The gasoline continued to emulsify after more time had elapsed

: The gasoline continued to emulsify after more time had elapsed

: The gasoline continued to emulsify after more time had elapsed

: OSEI official and fireman washed fuel off their hands with OSE II and water.jpg

: The gasoline continued to break down

: The fireman poured measured amounts of gasoline into various size test pans and an OSEI official observed fuel in the deep test vessel

: The fireman poured measured amounts of gasoline into various size test pans

: The fireman poured measured amounts of gasoline into various size test pans

: The fireman applied OSE II to the measured gasoline

: The fireman applied the OSE II and water mixture to the test pan

: The fireman applied the OSE II and water mixture to the test pan

: The fireman tried to ignite the deep test pan. The pan ignited, so more time was allowed

: OSEI official observed the restart of deep test pan with fuel and OSE II

: The gasoline emulsified and solublized

: The OSEI official observed the restart of deep test pan

: Adding energy to the test fuel speeds up emulsification

: The deep dish ignited after a second period of time, so a third time added to test

: The flames from the second test were extinguished

: The fireman measured fuel for the small area test pan to determine if area or depth changes the nonflammable point

: The fireman continued to measure fuel

: The fireman poured the measured gasoline into the small area test pan

: The fireman continued to pour measured gasoline into the small test pan

: The OSE II and water mixture was applied into the small area test pan

: The fireman continued to slowly pour the OSE II and water mixture into the small area test pan

: The fireman finished pouring the OSE II and water mixture into the small area test pan

: The short time for the emulsification and solubalization process was observed

: The fireman attempted to ignite the deep pan or a third test but was unable to ignite the gasoline

: The fireman continued to attempt to ignite the deep pan for 1 minute, but remained unsuccessful in lighting the gasoline

: After holding a torch to the gasoline for 1 minute, it was observed that in the third test that the gasoline was not able to light

: The fireman poured a measured amount of gasoline on the concrete

: The OSE II and water were mixed in a spray 3 gallon canister

: The OSE II and water mixture was poured into the concrete surface

: The fireman continued to apply the OSE II and water mixture to the gasoline on the concrete surface

: The fireman waited 3 minutes before attempting to ignite the gasoline that had OSE II and water applied to it

: The fireman attempted to ignite the gasoline after waiting for 3 minutes and it would not light

: While an OSEI Corporation official watched, the fireman continued to attempt to ignite the gasoline that had OSE II and water applied to it for 1 minute

: The fireman attempted to ignite the runoff of gasoline that had OSE II and water applied to it but it would also not light.

: An OSEI Corporation official watched as the fireman continued to try to ignite the runoff of gasoline that had OSE II and water applied to it

: The fireman attempted to ignite larger area test pan after a certain period of time and the gasoline would not light

: The fireman attempted to ignite the gasoline by holding the torch near the gasoline with the OSE II mixture applied to it and it was unable to light

: The firemen observed the gasoline with the OSE II applied mixture after failing to ignite it

: A second test was performed with diesel by pouring out a measured amount of diesel onto the concrete

: The fireman applied the OSE II and water mixture onto the diesel

: The fireman applied OSE II and water to areas the diesel had run off

: The fireman made sure all the areas of diesel were covered with OSE II

: The fireman waited 3 minutes before attempting to ignite the diesel with OSE II applied to it

: After 3 minutes, the fireman attempted to ignite the diesel that had OSE II applied to it

: The fireman attempted to ignite the diesel in different areas

: The fireman stood with the flame turned up high in the area where the diesel had OSE II applied to it and it still would not ignite

: The concrete was becoming scorched where the flame was held on high and yet the diesel still would not ignite

: A second test with diesel fuel was performed in the small and large area pans

: An OSEI Corporation observer

: After 3 minutes, the fireman attempted to ignite the diesel that had OSE II applied to it

: The OSE II and water mixture was applied to the small and large area test pans with diesel fuel

: After waiting a period of time the fireman tried to ignite the diesel with OSE II applied and it was unable to light

: The fireman held the torch onto the diesel with OSE II applied to it for 1 minite to make sure the fuel would not ignite

: The fireman held the torch close to the diesel fuel with OSE II applied to it and it was still unable to ignite

: The fireman turned up the flame onto the small area test pan with diesel and OSE II and it still would not ignite

: The firemen waited 3 minutes before testing the flammability of the large area test pan

: The large area test pan of diesel emulsified and solubilized quickly

: Diesel fuel quickly partitions and becomes nonflammable

: Deep test pan with diesel and OSE II showed emulsification and solubilization

: The fireman attempted to ignite the diesel fuel and OSE II and he could not get the fuel to light

: The diesel fuel and OSE II and water mixture after appeared scorched after holding the flame to it for 1 minute, but was unable to ignite

: Wylie Texas Fire Department haz mat truck getting an oil change

: P9170032.jpg

: P9170052.jpg

: P9170053.jpg

: wylie Texas fire department haz mat truck.jpg

Comments are closed.